Showing posts with label Quilting tips. Show all posts
Showing posts with label Quilting tips. Show all posts

Monday, 4 July 2016

Girls party dress, more scrap busting!


This is another free pattern from The Cottage Mama. You get the pattern when you sign up to her newsletter, and all the details are here.

I used the alternative bodice construction which has really good instructions the pattern download.

I used leftover fabric from my walkaway dress and the floral from the quilt I made. Luckily the two pinks matched perfectly.
The bit I struggled with for this dress was getting even gathers on the skirt. I tried I few times putting a long stitch and pulling the thread but each time the thread snapped.

In the end I used a method I found on pintrest. I cut a length of dental floss the width of the dress top. I then did a wide zig zag over the top of the floss. I tied one end of the floss to the skirt and pulled it through. It was so much easier this way!! One to remember indeed.

The end result is beautiful and perfectly twirly for the little girl to wear!

Wednesday, 29 June 2016

Sewing Bettine - Tilly and the Buttons pattern

I'm a bit behind in blogging so I've made Bedtimes since I last blogged.

I love this pattern as its super comfy and really easy to sew. This one I made with contrasting pockets and sleeve bands. I feel super punk in this dress!


The pattern has only a few main pieces and the instructions are really clear. Plus at the end you are instructed to drink Prosecco!

My only problem with this pattern is the sizing. My first bettine the armpits were a bit tight so lifting my arms became difficult and it was very tight across the bum.

I made mine in the largest size on the pattern size so perhaps I needed a size up. I'm normally a size 18 so perhaps next time I make one in non stretch fabric I'll  make some adjustments to the sizing as soon as I work out how!

I made another one in a size 2 for my friend who is a size 10 bad I think it fits her much better so perhaps its me that's a funny size! I made he's in Marvel superhero fabric and it was a perfect pattern as there wasn't any bust darts to cut out bits of characters.

My next Bettine will be in a stretch jersey as I think it will be a fab comfy dress and as I know the pattern well it will be a good test for trying out sewing with stretch knits.

Tuesday, 3 November 2015

Another wedding gift, with hearts and a single this time!

This quilt was made for my beautiful pretend cousin, who was sharing her wedding day with her even more beautiful daughter and her christening. The brief was she wanted a blanket for the sofa to snuggle under, the more colours the better (my kind of blanket) and she likes cath kitseny type fabrics.
 
http://www.bloglovin.com/blogs/cluck-cluck-sew-1095784/making-heart-blocks-in-multiple-sizes-4129213885/
I saw a picture on pintrest of a blanket with hearts all over it and pinned in, then she liked it too so I thought we must be on to a winner! As i'm still practising with shapes and applique I thought I would do some kind of paper piercing as another challenge for myself. I wanted the hearts to be large so I made each square 30cm tall. I used the table to size my squares up on the blog link here.

I picked which fabrics I wanted to use and set about cutting the shapes out. Cutting is the bit I hate the most so I cut everything out at once. I had one large rectangle of patterned fabric, a large square of plain fabric and two small plan squares. The sizes for these are on the blog link above.







Once the sections we all cut out I set about making the heart panels. You need two sets of what's in the picture above. if you place all the squares right side facing the patterned fabric you can then sew a straight line across the diagonal of each one. Once they are sewn you can fold the fabric over and iron it leaving you half a heart as below.

You repeat the process for the second half but make sure your diagonals go the opposite way say they match up and look like a heart together. You can then sew down the middle of the heart and iron that seam open at the back so it lays flat.

I then repeated the process I uses for the other quilt as I then had a square panel ready for joining together. In order to make the hearts stand out I used mostly plain fabrics so that it really became the focal point of the quilt. It also meant that I didn't need to make as many hearts as I could bulk out the quilt with plain fabric.



Once the topper was all complete I quilted it together with one piece of backing fabric. I free motioned quilted the patterns onto the plain fabric pieces using Guttermans thread that changes colour as it goes through, you can't really see in the pictures but I gave the free motion quilting a nice edge to it as it all changed shades of purple. The pattern I used had hearts in it too. I didn't draw the pattern on as this made it too hard for me to follow the plan, so I just quilted as I went along. I also did their initials in quilting on one side for a bit of a personal touch. I binded the quilt with some extra wide hessian floral print, which added even more floral patterns on and I think really finished the blanket.

After I managed to finish the final touches the morning of the wedding I made them open the blanket while I could see them and I think they loved it!



Monday, 10 August 2015

The wedding gift.. the final touches!

I then just had to bias bind the edges! I went with blue on Grandmas recommendation (check out the first post about the quilt about having boys under it!). I bought 9 meters of this extra wide binding as I though wide gave me more error space and a meter for mess up!

I sewed the back edge all the way done about 1/4" from the edge of the quilt making sure the rest of the binding was pointing towards the rest of the quilt. You can sort of see at the bottom of this picture how it is sticking out at the bottom, this is because I then brought the binding over my first stitch and clipped it on the front. This way you can only see one set of top stitched (in theory).

These clips were a god send, free with Simply Sewing mag! It saved it faffing around with pins and I could just slide the clip down! I then sewed all the way down and folder the corners over keeping the binding all one piece.


I made this panel for the back of the quilt with same ribbon from our wedding and some bits I bought which I thought gave it a great gift tag!





There we have it one finished quilt! Which she loved by the way :) Boy am I glad of that!!

The wedding gift continues!!! Basting

So I have it all stuck together with minimal glue (remember use lots!) and it has been moved upstairs ready for me to sew it all together in some the hottest days of the year! yay!
I decided to use a swirly random patterns as it was supposed to look random so it wouldn't show any mistakes I made along the way.

I watched a few videos which said if you have spray glued your 'sandwich' you can start basting anywhere in the quilt so off I set in the top right hand corner. I wouldn't recommend this as because I hadn't used enough glue I ended up with some squiggly bits with extra fabric in the middle like this.


 I made sure my feed dogs were down and just swirled the fabric around trying desperately to keep it taught and at an even stitch rate. I had real issues holding on the fabric whilst keeping it taught so my lovely husband whilst on a trip to Wickes bought me some building gloves with gripped palms. This made life sooo much easier as I could push it through with very little effort. Good job hubby!

I managed to sew right through my free motion foot though which bent my needle and got it stuck into the foot. This was because I was going too fast with the material I think and pulled it whilst the needle was on it's way out.


 It's quite hard getting a big quilt through the 'throat' of a home sewing machine. So I started rolling up the bits that needed to go through. As you can see. This left me spare to work on the square I was working on at the time whilst everything else was rolled up. I worked on a panel at a time in a patterened fashion, so I started with the top right, then I did one down and one across working my way diagonally across the quilt ending in the bottom left corner.

Hopefully you can see the difference in this picture between the bits that are basted and the bits yet to be done. It just shows you what a lovely texture it gives the finished product.


 Whilst doing this I caught the backing in my stitching a few times which left it rucked. I would recommend that once you have used plenty of glue to stop it moving always check your edge spares are hanging over the edges or they may get caught in the mix. I then cut all around the edges leaving the topper, wadding and backing all the same size.

The wedding gift... once the blocks were done!

So after a small eternity I had 9 sets of blocks. I sewed all these together by pinning the long side and doing a 1/4 inch seam. This wobbled slightly due to the extra fabric from the long panels that I wasn't counting on but it looked ok! It left me with the rather large piece but still not quite a double!


I had promised my self it would be a normal size but I couldn't bring myself to make another set of squares or 3 so I decided to make a cream border for round the edge which will frame the panel. So I made strips of cream 30cm wide and 1m long. I sewed two together then sewed that the the edges. This made it almost the right side and framed the lovely fabrics really well.

Now comes the time to 'sandwich' it. What they don't tell you is you need a bloomin' big space to be able to do this comfortably! I had popped into the shop Sew much to do and asked for help in how to baste my quilt as I had watched so many youtube videos I was confused! She suggested spray glue and helped me pick some wadding that would be best for my project. I would have to say Sew much to do is my favourite fabric shop so far as the staff are soo helpful and friendly and they are always willing to answer my silly questions! So I came away with a spray can of glue, 2.2m of wadding and 1m of muslin (for another project!).
I was looking at the extra wide fabrics everywhere for the quilt back but I didn't want anything to detract from the lovely fabric on the front, plus it was all very costly just because it was 'extra wide!'. So I bought a king size plain cream flat sheet from Wilkinsons which was lovely and soft and will do the trick just nicely!

The key was to have the bottom backing slightly bigger than the wadding, then the wadding slightly bigger than the topper so you can see what it's all doing.

I laid the sheet out on my kitchen floor, there wasn't really enough room and my puppy's were very interested in what I was doing so they were relegated to the garden! I then sprayed the top half of the sheet with the glue and laid the wadding on top. I smoothed it out then sprayed the wadding with glue and laid my topper onto it. I then folded the wadding and topper back on itself and sprayed the other half and repeated. I later learnt I didn't use enough glue as it started to come apart after a while so don't be frugal, spray away!

I then carried it upstairs very carefully ready to be basted on my machine.. I'll save these tips for a new post!



The beginning of the masterpiece wedding gift... The block

It's at this point I thought I rally ought to get on with making the wedding gift for my cousin I had planned... with 8 weeks to go...!

My cousin has recently bought a little cottage with her soon to be husband and they were renovating it ready to move in after they were married. She loves all things 'country kitchen' and vintage etc so I thought the perfect thoughtful gift from me would be something hand made, so I thought I'd make her a quilt!

I didn't really think this through, but hey I was going to try my hardest to finish it! I didn't know what size bed she was going to have either but I would be damned if I was going to try anything bigger than a double for my FIRST quilt, so I decided not to ask...!

I sourced my fabric, 4 different colours of the same rose fabric, 4 solids in similar colours and 4 other random ones I liked the look of. I bought a meter of each and I have plenty spare! I took my Grandma with me to buy some of the fabric and as I was picking out lovely pastels (the theme of the wedding!) she said to me 'You do know there will be a boy under this blanket Rudy you'll need some manly colours...!' Cheers for that image Grandma.. Queue blues being added! Most of my Fabric is from a facebook seller or ebay, though some is from Bobb in and Sew near where I live and some from Boyes again in Goole.

I found this blocks idea on Pintrest and it is now that I look back on it and see how the colour run through in lines, I didn't see that before! So mine really was a rough copy of this in rather large form.

I cut 9 15cm squares of each of the fabrics I was going to use as squares, and 9 of each double size squares 15cm wide and 30cm tall. This was the most boring bit!! I then decided that my squares would look a bit like this..

So I set about sewing all the squares together, trying to put similar colours at opposites. Then I sewed a pair of squares to a long panel giving me 4 corners of a square. I pinned two bottom sets together on the shortest sides and sewed down then in a straight line (please bare in mind you will have extra on the long panel as there inst an additional seam). I did the same with the top the sewed all the way down the middle. Be careful at this point with you seams, it may be useful to iron them to where you want them to stay though I have aversion to the iron so do as little of that as possible!

Ta daa one square.. only 8 more to go...! As you can see it didn't quite stick to my plan but random is good sometimes :)