Camp blanket, BADGES!!

When I went to visit my hubby family recently his little cousin told me about her Brownie pack holiday coming up. I decided she couldn't possibly let her go without her own camp blanket like mine! Well ok maybe not like mine as I have a few years up on the badge collecting but its a good start!

I bought 1 metre of fleece fabric from Peterborough market. I then squared it off and rounded the edges. Then I used floral bias binding all the way around the edge. I cut a straight slit in the middle for her head and binded those edges too. The edges of fleece don't need binding as it won't fray but it looks beautiful for a little girly girl.

 I cut out her name with my die cutter and appliqued this onto the back. It was a bit wonk but very Alice and wonderland!

I then zigzaged the badges I bought for her along the bottom ready for her to start collecting her own.

Another wedding gift, with hearts and a single this time!

This quilt was made for my beautiful pretend cousin, who was sharing her wedding day with her even more beautiful daughter and her christening. The brief was she wanted a blanket for the sofa to snuggle under, the more colours the better (my kind of blanket) and she likes cath kitseny type fabrics.
 

I saw a picture on pintrest of a blanket with hearts all over it and pinned in, then she liked it too so I thought we must be on to a winner! As i'm still practising with shapes and applique I thought I would do some kind of paper piercing as another challenge for myself. I wanted the hearts to be large so I made each square 30cm tall. I used the table to size my squares up on the blog link here.

I picked which fabrics I wanted to use and set about cutting the shapes out. Cutting is the bit I hate the most so I cut everything out at once. I had one large rectangle of patterned fabric, a large square of plain fabric and two small plan squares. The sizes for these are on the blog link above.







Once the sections we all cut out I set about making the heart panels. You need two sets of what's in the picture above. if you place all the squares right side facing the patterned fabric you can then sew a straight line across the diagonal of each one. Once they are sewn you can fold the fabric over and iron it leaving you half a heart as below.

You repeat the process for the second half but make sure your diagonals go the opposite way say they match up and look like a heart together. You can then sew down the middle of the heart and iron that seam open at the back so it lays flat.

I then repeated the process I uses for the other quilt as I then had a square panel ready for joining together. In order to make the hearts stand out I used mostly plain fabrics so that it really became the focal point of the quilt. It also meant that I didn't need to make as many hearts as I could bulk out the quilt with plain fabric.



Once the topper was all complete I quilted it together with one piece of backing fabric. I free motioned quilted the patterns onto the plain fabric pieces using Guttermans thread that changes colour as it goes through, you can't really see in the pictures but I gave the free motion quilting a nice edge to it as it all changed shades of purple. The pattern I used had hearts in it too. I didn't draw the pattern on as this made it too hard for me to follow the plan, so I just quilted as I went along. I also did their initials in quilting on one side for a bit of a personal touch. I binded the quilt with some extra wide hessian floral print, which added even more floral patterns on and I think really finished the blanket.

After I managed to finish the final touches the morning of the wedding I made them open the blanket while I could see them and I think they loved it!

The wedding gift.. the final touches!

I then just had to bias bind the edges! I went with blue on Grandmas recommendation (check out the first post about the quilt about having boys under it!). I bought 9 meters of this extra wide binding as I though wide gave me more error space and a meter for mess up!

I sewed the back edge all the way done about 1/4" from the edge of the quilt making sure the rest of the binding was pointing towards the rest of the quilt. You can sort of see at the bottom of this picture how it is sticking out at the bottom, this is because I then brought the binding over my first stitch and clipped it on the front. This way you can only see one set of top stitched (in theory).

These clips were a god send, free with Simply Sewing mag! It saved it faffing around with pins and I could just slide the clip down! I then sewed all the way down and folder the corners over keeping the binding all one piece.


I made this panel for the back of the quilt with same ribbon from our wedding and some bits I bought which I thought gave it a great gift tag!





There we have it one finished quilt! Which she loved by the way :) Boy am I glad of that!!

The wedding gift continues!!! Basting

So I have it all stuck together with minimal glue (remember use lots!) and it has been moved upstairs ready for me to sew it all together in some the hottest days of the year! yay!
I decided to use a swirly random patterns as it was supposed to look random so it wouldn't show any mistakes I made along the way.

I watched a few videos which said if you have spray glued your 'sandwich' you can start basting anywhere in the quilt so off I set in the top right hand corner. I wouldn't recommend this as because I hadn't used enough glue I ended up with some squiggly bits with extra fabric in the middle like this.

 I made sure my feed dogs were down and just swirled the fabric around trying desperately to keep it taught and at an even stitch rate. I had real issues holding on the fabric whilst keeping it taught so my lovely husband whilst on a trip to Wickes bought me some building gloves with gripped palms. This made life sooo much easier as I could push it through with very little effort. Good job hubby!

I managed to sew right through my free motion foot though which bent my needle and got it stuck into the foot. This was because I was going too fast with the material I think and pulled it whilst the needle was on it's way out.

 It's quite hard getting a big quilt through the 'throat' of a home sewing machine. So I started rolling up the bits that needed to go through. As you can see. This left me spare to work on the square I was working on at the time whilst everything else was rolled up. I worked on a panel at a time in a patterened fashion, so I started with the top right, then I did one down and one across working my way diagonally across the quilt ending in the bottom left corner.

Hopefully you can see the difference in this picture between the bits that are basted and the bits yet to be done. It just shows you what a lovely texture it gives the finished product.


 Whilst doing this I caught the backing in my stitching a few times which left it rucked. I would recommend that once you have used plenty of glue to stop it moving always check your edge spares are hanging over the edges or they may get caught in the mix. I then cut all around the edges leaving the topper, wadding and backing all the same size.

The wedding gift... once the blocks were done!

So after a small eternity I had 9 sets of blocks. I sewed all these together by pinning the long side and doing a 1/4 inch seam. This wobbled slightly due to the extra fabric from the long panels that I wasn't counting on but it looked ok! It left me with the rather large piece but still not quite a double!


I had promised my self it would be a normal size but I couldn't bring myself to make another set of squares or 3 so I decided to make a cream border for round the edge which will frame the panel. So I made strips of cream 30cm wide and 1m long. I sewed two together then sewed that the the edges. This made it almost the right side and framed the lovely fabrics really well.

Now comes the time to 'sandwich' it. What they don't tell you is you need a bloomin' big space to be able to do this comfortably! I had popped into the shop Sew much to do and asked for help in how to baste my quilt as I had watched so many youtube videos I was confused! She suggested spray glue and helped me pick some wadding that would be best for my project. I would have to say Sew much to do is my favourite fabric shop so far as the staff are soo helpful and friendly and they are always willing to answer my silly questions! So I came away with a spray can of glue, 2.2m of wadding and 1m of muslin (for another project!).
I was looking at the extra wide fabrics everywhere for the quilt back but I didn't want anything to detract from the lovely fabric on the front, plus it was all very costly just because it was 'extra wide!'. So I bought a king size plain cream flat sheet from Wilkinsons which was lovely and soft and will do the trick just nicely!

The key was to have the bottom backing slightly bigger than the wadding, then the wadding slightly bigger than the topper so you can see what it's all doing.

I laid the sheet out on my kitchen floor, there wasn't really enough room and my puppy's were very interested in what I was doing so they were relegated to the garden! I then sprayed the top half of the sheet with the glue and laid the wadding on top. I smoothed it out then sprayed the wadding with glue and laid my topper onto it. I then folded the wadding and topper back on itself and sprayed the other half and repeated. I later learnt I didn't use enough glue as it started to come apart after a while so don't be frugal, spray away!

I then carried it upstairs very carefully ready to be basted on my machine.. I'll save these tips for a new post!

Baby car seat blankets - How to!

My next adventure was spurred on by my very special pretend cousin being preggers! By pretend cousin I mean the kind of person you grow up with, who you call their parents Aunt and Uncle but when you turn about 7 and realise your not actually related it doesn't matter! When this lovely lady is 'Our Von' and whilst planning a wedding she has a lovely baby girl 'Our Syd'.

Von had found this car blanket on pintrest which looked really useful for keeping bub warm and toasty but not so easy to slip off in the car of pram. so I set about making it for this beautiful baby!

We didn't know what baby flavour Sydney was going to be so I was looking for neutral kind of fabrics. I found these in Krafty Kats in Huntingdon, If you have never been it's worth a journey, it a treasure trove of cake baking, sewing, knitting and papercrafts and you always find just what you need, and often a lot of what you don't need! I'm always there last on a Monday before guides trying to make a plan of what we can do that evening so I find them a saviour!

So I purchased
1m of animal fabric
1m of yellow gingham
1m of wadding (I used the expensive cotton kind because at the time I wasn't sure what I was looking for and I was worried since it was for a baby)

Below are the instructions I used though it won't matter if you deviate slightly.

• Put the two pieces of fabric spread of patterns facing each other. Fold them into quarters and cut around them to round the corners as below:

• Lay out the batting again on the floor in my case, and lay the rounded corner sandwich on to of the batting, keep the two patterns facing each other at the moment.
• put the sandwich to the batting and the cut the batting to match the shape of the other fabric.
• Keep everything pinned together and sew all the edges together, leaving one corner open.
• Turn the blanket right side in, so you have patterned fabric of both sides.
• Fold the blanket in half , then draw a straight line across the corner you haven't sewn up yet. Cut this line off then sew it up with a large zigzag stitch creating  a hood.
• You can zigzag all the way round the edge it you want to, to give it a nice finish though when I did I wished I hadn't as I made such a mess of it not keeping it straight! As you can see..
 
• Now you need to cut the gaps for the safety straps to go in. What I did was got Von to measure the distance between each strap and put the measurement roughly in the middle, what you could do if place it in the care seat and mark out where each strap needs to go. Then you need to sew a large rectangle around where you are going to make a hole so that it doesn't fray or run into being a huge hole! I then laid it on my cutting mat and made 3 straight lines within the squares I have made with my rotary cutter like below.

There you have it! NICE AND EASY

 

Hopefully you'll end up with a super cutie to be 'swaddled' in it like this!

I had to ask what swaddleing was... apparently its like wrapping the baby up in all the layers, like it the picture! ha ha.

As you can see this one is a little big just yet, but I'm fairly certain she'll grow into it!

 

Update - it's even good in a bouncy seat too, and it stops mummy getting annoyed at the blanket always slipping off or being kicked off!