Tuesday, 3 November 2015

Another wedding gift, with hearts and a single this time!

This quilt was made for my beautiful pretend cousin, who was sharing her wedding day with her even more beautiful daughter and her christening. The brief was she wanted a blanket for the sofa to snuggle under, the more colours the better (my kind of blanket) and she likes cath kitseny type fabrics.
 
http://www.bloglovin.com/blogs/cluck-cluck-sew-1095784/making-heart-blocks-in-multiple-sizes-4129213885/
I saw a picture on pintrest of a blanket with hearts all over it and pinned in, then she liked it too so I thought we must be on to a winner! As i'm still practising with shapes and applique I thought I would do some kind of paper piercing as another challenge for myself. I wanted the hearts to be large so I made each square 30cm tall. I used the table to size my squares up on the blog link here.

I picked which fabrics I wanted to use and set about cutting the shapes out. Cutting is the bit I hate the most so I cut everything out at once. I had one large rectangle of patterned fabric, a large square of plain fabric and two small plan squares. The sizes for these are on the blog link above.







Once the sections we all cut out I set about making the heart panels. You need two sets of what's in the picture above. if you place all the squares right side facing the patterned fabric you can then sew a straight line across the diagonal of each one. Once they are sewn you can fold the fabric over and iron it leaving you half a heart as below.

You repeat the process for the second half but make sure your diagonals go the opposite way say they match up and look like a heart together. You can then sew down the middle of the heart and iron that seam open at the back so it lays flat.

I then repeated the process I uses for the other quilt as I then had a square panel ready for joining together. In order to make the hearts stand out I used mostly plain fabrics so that it really became the focal point of the quilt. It also meant that I didn't need to make as many hearts as I could bulk out the quilt with plain fabric.



Once the topper was all complete I quilted it together with one piece of backing fabric. I free motioned quilted the patterns onto the plain fabric pieces using Guttermans thread that changes colour as it goes through, you can't really see in the pictures but I gave the free motion quilting a nice edge to it as it all changed shades of purple. The pattern I used had hearts in it too. I didn't draw the pattern on as this made it too hard for me to follow the plan, so I just quilted as I went along. I also did their initials in quilting on one side for a bit of a personal touch. I binded the quilt with some extra wide hessian floral print, which added even more floral patterns on and I think really finished the blanket.

After I managed to finish the final touches the morning of the wedding I made them open the blanket while I could see them and I think they loved it!



Saturday, 17 October 2015

Poppy covered oven gloves

So I made these as a gift for my poppy mad Grandma, but now she thinks they are too pretty to use! Typical! Anyway i made them like this...


First I laid the patterned fabric out on the table and measure it with my current over gloves for width and length. I bought a meter of this poppy fabric and I have plenty left to make Grandma the apron to match she so subtly hinted about for Christmas.

So once I had two of those, I cut out the special heat proof wadding I had bought to be sandwiched between the two at the same size. I then with my matching thread just run straight stitched down the length of the sandwich and at four points side to side to quilt it all together.

I then used 1 fat quarter of red fabric and made the pockets. I copied again the size of my current over gloves but made the corners square. What I did was I doubled the length required of red fabric so I could fold it over the wadding and not have a seam at the opening. So I cut two sets of the red and sandwich that with heatproof wadding again. I'm not sure if you needed to use heatproof for the pockets but as it was for my Grandma I wanted to be safe. I quilted these together with a row or two of the fancy stiches my machine does which hopefully you can see on the top picture.
Please note a basted these with the spray glue left over from my quilts but there wasn't much left so it got a bit gloopy and left marks on the fabric where it settled. I won't use it near the end again as it left greasy marks on my red fabric.

I then sewed the two pockets on by doing a square all the way around the pocket attaching the pocket to the poppy sandwich I previously made.

I the trimmed the edges and put red bias binding all the way round to finish it off, and popped it in the post! The best bit was when the post office lady asked what was in my parcel... oven gloves! What a funny look I got!

Thursday, 15 October 2015

The infamous 'Walkaway dress' Butterick B4790

After seeing this dress on The Great British Sewing Bee I instantly fell in love! My personal style is very retro and flared dresses like this flatter my curves well.
I bought the pattern on a whim when it was half price thinking I'll get round to it when I'm a bit more skilled, but no I decided to go head first on this one!

I was a bit daunted by the amount of fabric I needed to make this, so I thought if I mess it up it's going to be a huge waste of money. So whilst in Dunelm I saw that their plain block coloured duvets and sheets were on sale! I bought a bright pink and a bright turquoise double duvet for the grand total of £9! Perfect for messing things up I though!


I started by Ironing out the pattern pieces as this was my first go with a proper pattern so I was following all the things I had learnt watching plenty on YouTube! Once I have ironed them, I taped them to our living room floor then taped tracing paper over it. I copied out all the lines for my size then cut it out. I carefully folded my pattern back away and from then on only used the tracing paper and the instructions that came with the pattern.

Now as I was using a duvet the normal pattern placing on my instructions didn't quite work as my fabric wasn't the usual width or length. I made sure the folds were in the right places and I cut out enough of every piece.

Tia wasn't very helpful in this stage!

So after I cut all my piece out. I followed the instructions in the pattern to the letter, and I ended up with something that resembled a dress! Please keep in mind I am a beginning so I didn't move any of the darts or change the pattern in any way and I have since learnt it definitely needs to be done on this dress as it's a vintage pattern which doesn't fit modern bodies as well.

I then had the task of the miles of bias binding! I decided rather than buy a specific amount which I would probably end up messing up and needing to source more, I bought a 20m roll from ebay as the fabric was very plain I bought some polka dot bias binding to jazz the dress up a bit. I bought extra wide binding, half because I wanted to make life a bit easier and less fiddly and half because I wanted it to stand out.


I watched a tutorial on ebay about bias binding on clothing as I have only put it on quilts so far so there is much more of a sandwich involved. The video suggested ironing the binding in half reading to be slotted over the dress edges already ironed in place. I ironed about 4m of binding and started to put it around the dress starting on the corner of the piece that is at the back and covered by the skirt. I used my quilting clips rather than pinning it as it stopped it from being a bit too fiddly. This also helped me just keep moving the clips further down as I went the whole loop around the dress. make sure you leave extra binding along the back to tie the back panels together. I let about 20cm on either side which is enough to leave a small bow under the skirt.

I started by putting buttons in the front, but because I hadn't tweaked the pattern at all it didn't quite close properly in the middle and it wasn't very comfortable. So instead I took the buttons off and replaced it with some extra bias binding which I tie in a box at the front making it much more comfortable, and perfect for going out for a meal and overeating as it expands!

Ta daa! A very awkward looking me in an unruly looking garden!! As you can see the top it really baggy about my boobs and you may not see by under may arms is quite low and shows my bra so I would need to tweak the darts next time I make this. I'll have to learn how to do that first though! ;)

Friday, 14 August 2015

A less poofy much more wearable skirt, with elastic waist

 


This skirt was the result of a facebook post on one of the sewing forums asking for advice on the easiest was to make a comfy skirt.

I had this fabric from the Knit and Stitch show in Birmingham I had been to a good few months before but I was saving it for something I would wear so I risked it with this!
.


I had 2m of this fabric and 2m of 1cm wide elastic. I measured the length i wanted the skirt to be, ie waist to calf. Then i cut two rectangles 1m wide by thr length i measured deep. 

I cut the same pockets as before and sewed one to each side of the fabric. I then sewed the two short sides together, following the edge of the fabric including the pockets. I then hemmed the bottom up all the way around, this would be easier if i didnt have an iron aversion so try ironing the seam first.

I then sewed the top in a very similar hem but i left a gap on one edge still open. This is for me to feed the elastic through. I cut the elastic to the size of my waist learning from the last skirt about stretching it a little. I then attached a small safety pin to either end of the elastic and attached one end to the fabric of the skirt. The other end i fed through the top channel all the way around allowing it to gather as I went along. 

When I had both safety pins back out the skirt i machined the two ends of elastic together. Then finished hemming the top of the fabric.

I could then wear my new skirt for the family BBQ! Fabulous!

Thursday, 13 August 2015

Poofy skirt with elastic waist

Another make from a sewing mag this time Love Sewing!

I followed the instructions in the mag for this one, which was issue 15. It basically involved 2m of fabric and some wide elastic.

I drew round the pocket template in cream and sewed one on each straight edge of fabric. I then put the straight edges together and sewed the up either side, going around the pocket edges also.

I hemmed the whole thing up in a loop. Then I zig zagged the whole top of the skirt, then did a long stich all the way around which I pulled on the bobbin end to gather it.

I then attached the elastic without stretching it.

If I did it again I would use less elastic so that it needs to str3tch to fit and it will lie much nicer.

Tuesday, 11 August 2015

Kimono style jacket


This was the first thing I had made for myself properly. I used a rough pattern that was in Simply Sewing.
I bought 2m of jersey floral fabric off ebay as usual and set to work.

I folded the two meters in half right sides together and sewed 1" seams either side leaving 15cm for arm holes. I apologise for my mixture of metric and imperial my brain works in cm by my sewing machine works in inches!
I then cut all the way up the middle and across the top in a T shape. The top of the T was  20cm but it could have been much smaller.

I then put it on an felt like I was wearing a dressing gown, so I trimmed the bottoms about 30cm on each side to make it the length it is on the picture.

Ta daa! easiest and quickest make ever!

Monday, 10 August 2015

The wedding gift.. the final touches!

I then just had to bias bind the edges! I went with blue on Grandmas recommendation (check out the first post about the quilt about having boys under it!). I bought 9 meters of this extra wide binding as I though wide gave me more error space and a meter for mess up!

I sewed the back edge all the way done about 1/4" from the edge of the quilt making sure the rest of the binding was pointing towards the rest of the quilt. You can sort of see at the bottom of this picture how it is sticking out at the bottom, this is because I then brought the binding over my first stitch and clipped it on the front. This way you can only see one set of top stitched (in theory).

These clips were a god send, free with Simply Sewing mag! It saved it faffing around with pins and I could just slide the clip down! I then sewed all the way down and folder the corners over keeping the binding all one piece.


I made this panel for the back of the quilt with same ribbon from our wedding and some bits I bought which I thought gave it a great gift tag!





There we have it one finished quilt! Which she loved by the way :) Boy am I glad of that!!